Plastics, rubber, sensitive metals,
electricity, electronics, ceramics, aviation, defense,
etc.
It does not give any damage to the surface during
deburring and cleaning when parts are produced.
Standard
Names of goods
standard
Hardness
Specific gravity(g/㎤)
KBM
12/16 -(1.68mm~1.19mm)
MOHS
4.0
1.5
KBM
16/20-(1.19mm~0.84mm)
KBM
20/30-(0.84mm~0.54mm)
KBM
30/40-(0.58mm~0.42mm)
KBM
40/60-(0.42mm~0.25mm)
KBM
60/100-(0.25mm~0.15mm)
Uses
Features
- Cleaning of various molds
- surface dirt (pollutants such as rust, oil, stains)
- Cleaning of the ship screw
- Cleaning a lot of bent parts
- the surface of metal and debris
- DEFLASHINGElectronic and electrical semiconductor
parts DEFLASHING
- There is no wear on the mold surface
- There is no influence on plating area
- There is no dust, no toxicity
- High temperature mold can work immediately
- Lifetime is long.
- Maintenance cost is low.
KBU
Plastics, rubber, sensitive metals,
electricity, electronics, ceramics, aviation, defense,
etc
It does not give any damage to the surface during
deburring and cleaning when parts are produced.
PA, PC, CG, PB, MC, MB, ACRIL, walnut shell, soda
Standard
Names of goods
standard
Hardness
Specific gravity(g/㎤)
KBU
8/12-(2.36mm~1.70mm)
MOHS
3.5
1.5
KBU
12/16 -(1.68mm~1.19mm)
KBU
16/20-(1.19mm~0.84mm)
KBU
20/30-(0.84mm~0.54mm)
KBU
30/40-(0.58mm~0.42mm)
KBU
40/60-(0.42mm~0.25mm)
KBU
60/100-(0.25mm~0.15mm)
Uses
Features
- BURR removal of diecasting products
- Cleaning of castings, forgings, etc
- BURR removal of plastic articles
- Removal of paints and adhesives (aircraft, automobiles,
ship parts, etc.)
- Electronic and electrical semiconductor parts
DEFLASHING
- Paint removal of powder coating process
- There is no wear on the mold surface
- There is no influence on plating area.
- There is no dust, no toxicity
- High temperature mold can work immediately
- Lifetime is long.
- Maintenance cost is low.
- WHEEL BLAST available
PA
It is used to remove burr of thermosetting
resin injection products
(wiring equipment, bobbins, sockets, etc.) and precision
die casting products
Standard
Names of goods
standard
Hardness
Specific gravity(g/㎤)
PA-60
0.38 × 0.54mm
HRr - 110
1.13
PA-40
0.50 × 0.88mm
PA-30
0.75 × 1.32mm
Uses
Features
- Removal of burr from thermosetting
resin injection products
(wiring equipment, sockets, etc.)
- Mold cleaning
- There is no dust, no toxicity
- Product size is constant.
- Long life (about 10 times the walnut shell)
PC
It is used for burr removal of precision
die casting parts (Al, Zn, Mg) and tools (drill,
saw, gear).
Standard
Names of goods
Hardness
Specific gravity(g/㎤)
PC-80
HRr - 122
1.2
PC-60
PC-40
PC-30
PC-20
Uses
Features
- Burr removal of thermosetting
resin injection products
(Circuit Breakers, ELB, etc.)
- Removal of burr from Daicesting products (AL,
Zn, Mg)
- Burr removal of tool (drill, saw, etc.)
- Rubber Molding
- There is no dust, no toxicity
- Product size is constant
- Long durability (about 10 times the walnut shell)
CG
It works in rapid freezing condition
and does not damage the product.
It is mainly used for removing burr of rubber parts
such as O-ring, oil seal, packing, gasket, anti-vibration
rubber etc.